Time - HP StorageWorks 1/16 Tape SuperLoader Manual

5. On the Ethernet submenu, scroll to Set Time Server. (See Figure 24.)
6. Press Enter.
7. At each position of the server address, scroll to the correct number and press
Figure 29: Setting the time server address
Note:
8. Press Enter.
9. Press Escape or Enter to return to the Ethernet submenu.

Time

If you cannot access a time server because your server does not support SNTP or
for security reasons, you can set the time manually. If you want to include time
changes such as daylight savings time, you must make those changes manually as
well.
To set the timezone:
1. On the main menu, scroll to Configuration.
Figure 30: Main menu
2. Press Enter.
1/16 Tape SuperLoader Reference Guide
Enter to advance your cursor.
Time Server:
192.005.044.041
Use the Escape key to backspace to a previous text box, if necessary.
When you have set the server address, the SuperLoader displays Enter to save.
Time Server changed to appears on the panel display. You do not need to
reboot the SuperLoader.
Status
Commands
Configuration
Diagnostics
Installation and Configuration
35