View Element Status - HP StorageWorks 1/16 Tape SuperLoader Manual

SuperLoader Operation
6. Press Enter.
Figure 59: SuperLoader version messages
Table 5: SuperLoader Version Messages
Firmware
EDC
HW Rev
ME Rev

View Element Status

The element status reports the status of the magazine slots. The status indicates
whether a slot contains a cartridge, and which slot is allocated as the cleaning
cartridge's slot.
To view an element's status:
1. On the main menu, scroll to Status. (See Figure 55.)
2. Press Enter.
3. On the Status submenu, scroll to SuperLoader Info. (See Figure 56.)
4. Press Enter.
68
A list of messages similar to the following screen appears.
Firmware: V7.0
EDC: 575A49B8
HW + ME Rev: 1 1
The number indicates the firmware version.
The number indicates the Error Detection Code that
was generated when the firmware was installed. The
SuperLoader uses this number to verify that the
firmware and the memory holding the firmware are
good.
The number indicates the hardware version.
The number indicates the mechanical version.
1/16 Tape SuperLoader Reference Guide