SuperLoader Operation
Run Diagnostic Tests
If the status information indicates an error, view the event log.
To view the event log:
1. On any Web Administration page, click Diagnostics.
Figure 71: Diagnostic page
2. Click View Log.
When an error message appears in the status information, you may need to run a
diagnostic test.
To run a diagnostic test:
1. On any Web Administration page, click Diagnostics.
2. From the Test drop-down menu, select the diagnostic test that you want to run.
3. Click submit.
4. While the test is running, you can view the status of the test by clicking View
78
Status. To refresh the status information, click the Back button on your
browser, and then click the View Status button again.
1/16 Tape SuperLoader Reference Guide