Table of Contents
Advertisement
Tape Drive Cleaning
Your tape drive read/write head should be cleaned periodically. When cleaning is
needed, the drive automatically requests the backup software to perform a
cleaning operation. However, you can also initiate cleaning from the front panel as
needed.
Use a cleaning tape to clean your tape drive. The DLTtape cleaning tape looks just
like a DLTtape IV cartridge, except that its shell is beige.
Configuring the Cleaning Tape Location
Before inserting the cleaning tape you must configure the cleaning tape location.
1. On the main menu, scroll to Configuration.
2. Press Enter.
3. Scroll to Cleaning Tape.
4. Press Enter.
5. Log in as Administrator.
6. Scroll to Cleaning Tape Location.
7. Press Enter.
8. Select an available slot (no * next to the slot number).
1/16 Tape SuperLoader Reference Guide
5
91
Advertisement
Table of Contents
