Service Menu; Setup Menu - Sony HDC-900 Maintenance Manual

In this section, describes the service menu (SERVICE menu) in the setup menu displayed on the view-
finder. For other menus, refer to Section 3 of the Installation and Maintenance Manual.

5-1. Setup Menu

The setup menu is used for selecting various setting values, items displayed on the viewfinder screen, the
method of displaying, and adjustments. The menu is displayed on the viewfinder screen. The menu can
also be displayed by connecting an external monitor to the TEST OUT connector.
Normally, SERVICE menu will not be displayed in the setup menu, but this SERVICE menu can be
displayed by setting the switches (S100-1 to S100-4) on the AT-130 board.
Structure of Setup Menu
The setup menu is composed of the following menus.
. OPERATION menu
. PAINT menu
. MAINTENANCE menu
. FILE menu
. DIAGNOSIS menu
. SERVICE menu (This menu is not displayed at the factory setting state.)
n
Beside above menus, the TOP menu is provided for indicating the whole configuration of the menu items.
Selecting the Menu
The menus to be displayed on the viewfinder screen can be selected by the switches (S100-1 to S100-4)
on the AT-130 board. At the factory setting state, the menu is set to display from OPERATION menu to
DIAGNOSIS menu.
( ) : Shows the factory setting
Switch Settings
S100-1 S100-2 S100-3 S100-4
(OFF) (OFF) (OFF) (OFF)
ON OFF OFF OFF
OFF ON OFF OFF
ON ON OFF OFF
OFF OFF ON OFF
ON ON ON ON
Equipment Required
HDC-900
7-type viewfinder HDVF-700A/7700/C700W (or black-and-white monitor)
Camera control unit HDCU-900/700A
HDC-950
2-type viewfinder HDVF-20A (or black-and-white monitor)
Camera control unit HDCU-900/700A, or AC adapter AC-550, etc. for supplying the power to the
camera.
HDC-900/950 MM
http://getMANUAL.com
Section 5

SERVICE Menu

Setup Menu
OPERATION PAINT MAINTENANCE
Yes Yes Yes
Yes Yes Yes
Yes Yes No
Yes No No
Yes No No
Yes Yes Yes
FILE DIAGNOSIS SERVICE
Yes Yes No
No Yes No
No Yes No
No Yes No
No No No
Yes Yes Yes
5-1 (E)