Replacing The Mic Connector; Front Mic Connector - Sony HDC-900 Maintenance Manual

3-12. Replacing the MIC Connector

3-12-1. FRONT MIC Connector

1. Remove the front fan assembly. (Refer to Section 3-4-
2.)
2. Remove the two screw, and remove the V shoe
assembly.
3. Remove the three screws in the order 2 and 1, and
remove the shoulder pad assembly.
K4 x 8
V shoe assembly
4. Remove the two screws, and remove the bottom plate.
Precision
P2.6 x 5
HDC-900/950 MM
2B3 x 8
(with stopper)
Shoulder pad assembly
1B4 x 12
(with stopper)
Bottom plate
5. Disconnect the harness connectors from connectors
(CN1 and CN2) of CN-2026 board.
CN2
CN-2026 board
6. Remove the tow screws, and remove the FRONT MIC
connector with pressing connector lever.
Lever
FRONT MIC connector
7. Install the new FRONT MIC connector in the reverse
order of steps 1 to 6.
3-12. Replacing the MIC Connector
CN1
Harness connector
Harness connector
P2.6 x 5
3-15 (E)