Cn-2073 Board - Sony HDC-900 Maintenance Manual

10. Remove the screw, and remove IF board.
11. Install the new MB-833 board in the reverse order of
steps 1 to 10.
HDC-900/950 MM
http://getMANUAL.com

2-6-4. CN-2073 Board

1. Loosen the four screws, and remove the control panel
assembly.
2. Disconnect the flexible card wire from the connector
CN10 of the CN-1974 board, and disconnect the
harness connector from connector CN2 of the CN-
2073 board.
MB-883 board
n
Refer to Section 1-6 for details on disconnecting/
connecting the flexible card wire.
PSW3 x 6
PSW3 x 6
PSW3 x 6
B3 x 8
B3 x 8
Control panel
assembly
B3 x 8
CN-2073 board
CN2
B3 x 8
2-6. Replacing the Boards
CN-1974 board
CN10
CN3
2-13 (E)