Makita DML805 Instruction Manual page 4

ASSEMBLY
CAUTION:
•
unplugged, and the battery cartridge is removed before
carrying out any work on the luminaire.
Assembling the frame and the base
1
3
Assemble the worklight as follows:
1. Remove the screws.
2. Insert the legs of the frame into the base.
3. Align the holes of the frame and the base.
4. Tighten them with screws.
FUNCTIONAL DESCRIPTION
CAUTION:
•
unplugged, and the battery cartridge is removed before
adjusting or checking function on the luminaire.
Use with battery:
Installing or removing battery cartridge
CAUTION:
•
installing or removing of the battery cartridge.
•
when installing or removing battery cartridge.
Failure to hold the luminaire and the battery cartridge
in damage to the luminaire and battery cartridge and a
personal injury.
To install the battery cartridge, release the cover lock, and
open the battery cover. And insert the battery cartridge.
Align the tongue on the battery cartridge with the groove
in the housing and slip it into place. Insert it all the way
until it locks in place with a little click. Then close the
battery cover.
4
1. Frame
2. Base
3. Screw
2
1. Cover lock
3
2. Battery cover
3. Battery cartridge
2
1
To remove the battery cartridge, slide it from the luminaire
while sliding the button on the front of the cartridge.
CAUTION:
• Always install the battery cartridge fully in place. If not, it
may accidentally fall out of the luminaire, causing injury
to you or someone around you.
• Do not install the battery cartridge forcibly. If the
cartridge does not slide in easily, it is not being inserted
correctly.
Indicating the remaining battery capacity
(Only for battery cartridges with "B" at the end of the
model number.)
1
Press the check button on the battery cartridge to indicate
the remaining battery capacity. The indicator lamps light
up for few seconds.
Indicator lamps
Lighted Blinking
NOTE:
• Depending on the conditions of use and the ambient
actual capacity.
1. Indicator lamps
2. Check button
2
Remaining capacity
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Charge the battery.
The battery may have
malfunctioned.