Advertisement
NOTE:
If you turn the auto IP on, when you dial a number ahead with
"0", the phone will dial out the IP code first.
l
Dialling mode setting
When the LCD shows
button to confirm and the LCD shows the current setting (
s
t
TONE
) Use
.
or
button to select the desired dialling mode, press
SET
button to confirm and enter the next setting mode automatically.
The LCD will show
SET 7 ALERT
.
l
Alert
setting
When the LCD shows
to confirm and the current setting is displayed. The sequence digit on
s
t
the left will flash, press
or
are 3 groups of alert time for setting. Then press
and enter the alert time setting. Press
and then the
SET
button to confirm. After setting alert time,
s
will flash on the LCD. Press
activate or deactivate the alert function. Then press
confirm and enter the next setting mode automatically. The LCD will
show
SET 8 Hour
. (The menu
SET 8 Hour
NOTE:
When the alert sounds, press any key to switch it off.
l
LCD contrast setting
When the LCD shows
button to confirm and the LCD shows the current setting. For example,
s
t
LCD 3
.
Use
or
button to select the LCD contrast level (5 levels for
choosing), press
SET
button to confirm then press
SET 6 P-T
,
press
PULSE
SET 7 ALERT
,
press
SET
button
button to select the digit (1-3). There
SET
button to confirm
s
t
or
button to select the digit
ON
or
t
or
button to select
ON
or
OFF
SET
button to
is invalid.)
SET 9 LCD
,
press
DEL
button to exit.
10
CHECK THE CONTENTS OF THE BOX
Box should contain:
SET
l
Handset with handset cord and phone base
or
l
Telephone line cord
l
User's manual
l
Bracket
BATTERY INSTALLATION
The Caller ID phone requires three 1.5V AA size batteries (not supplied)
to keep the information stored in the phone.
1. Remove the battery cover from the back of your Caller ID phone
2. Insert three 1.5V AA size batteries by observing the +/- polarity
marked in the compartment.
3. Replace battery compartment cover.
CONNECTING LINE CORDS
Plug one end of the supplied modular cord into the line jack. Then plug
OFF
the other end into telephone wall line jack.
to
SET
INTRODUCTION
3
Advertisement
