Modifying Snmp Notifications - Cisco ESW 500 Administration Manual

Configuring SNMP
Defining Trap Management
STEP 3
STEP 4
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
•
Filter Name — Defines if the SNMP filter for which the SNMP Notification filter
is defined.
•
Timeout — Indicates the amount of time (seconds) the device waits before re-
sending informs. The default is 15 seconds.
•
Retries — Indicates the amount of times the device re-sends an inform request.
The default is 3 attempts.
Define the relevant fields.
Click Apply. The SNMP Notification Recipient settings are defined, and the device
is updated.

Modifying SNMP Notifications

The Edit SNMP Notification Recipient Page
notification settings. The
areas, Notification Recipient, SNMPv1,2 Notification Recipient, SNMPv3
Notification Recipient and UDP Port Notification Recipient.
Click Monitor & Device Properties > SNMP > Trap Management > Station
Management.
Click the Edit button. The
allows system administrators to define
Edit SNMP Notification Recipient Page
Edit SNMP Notification Recipient Page
13
is divided into four
opens:
354