Cisco ESW 500 Administration Manual page 330

Configuring Quality of Service
Defining Advanced QoS Mode
STEP 1
STEP 2
ESW 500 Series Switches Administration Guide
Click Quality of Service > Advanced Mode > Aggregate Policer. The
Policer Page
opens:
Aggregate Policer Page
Aggregate Policer Page
The
•
Aggregate Policer Name — Specifies the Aggregate Policer Name
•
Ingress CIR — Defines the Committed Information Rate (CIR) in Kbits per
second.
•
Ingress CbS — Defines the Committed Burst Size (CbS) in bytes per second.
•
Exceed Action — Action assigned to incoming packets exceeding the CIR.
Possible values are:
-
Drop
— Drops packets exceeding the defined CIR value.
-
Remark DSCP
CIR value.
-
None
— Forwards packets exceeding the defined CIR value.
Click the Add button. The
contains the following fields.
—Remarks packet's DSCP values exceeding the defined
Add QoS Aggregate Policer Page opens:
12
Aggregate
319