Cisco ESW 500 Administration Manual page 328

Configuring Quality of Service
Defining Advanced QoS Mode
STEP 2
ESW 500 Series Switches Administration Guide
-
AND
— Both the ACL 1 and the IP-based ACL 2 must match a packet.
-
OR
— Either the ACL 1 or the ACL 2 must match a packet.
•
ACL 2 — Contains a list of the user-defined ACLs.
Click the Add button. The
Add QoS Class Map Page
Add QoS Class Map Page
The
•
Class Map Name — Defines a new Class Map name
•
IP ACL — Matches packets to IP based ACLs first, then matches packets to
MAC based ACLs.
•
Match — Criteria used to match IP addresses and /or MAC addresses with an
ACL's address.The possible field values are:
-
AND
— Both the MAC-based and the IP-based ACL must match a
packet.
-
O
R — Either the MAC-based or the IP-based ACL must match a packet.
•
MAC ACL — Matches packets to MAC based ACLs first, then matches packets
to IP based ACLs.
•
Preferred ACL — Defines if packets are first matched to an IP based ACL or a
MAC based ACL. The possible field values are:
-
IP Based ACLs
packets to MAC based ACLs.
Add QoS Class Map Page
contains the following fields.
— Matches packets to IP based ACLs first, then matches
12
opens:
317