Cisco ESW 500 Administration Manual page 265

Configuring Multicast Forwarding
IGMP Snooping
STEP 3
ESW 500 Series Switches Administration Guide
Edit IGMP Snooping Page
Edit IGMP Snooping Page
The
•
VLAN ID — Specifies the VLAN ID.
•
IGMP Status Enable — Indicates if IGMP snooping is enabled on the VLAN. The
possible field values are:
-
Enable
— Enables IGMP Snooping on the VLAN.
-
Disable — Disables IGMP Snooping on the VLAN.
•
Auto Learn — Indicates if Auto Learn is enabled on the device. If Auto Learn is
enabled, the devices automatically learns where other Multicast groups are
located. The possible field values are:
-
Enable
— Enables auto learn.
-
Disable
— Disables auto learn.
•
Host Timeout — Indicates the amount of time host waits to receive a message
before timing out. The default time is 260 seconds.
•
MRouter Timeout — Indicates the amount of the time the Multicast router waits
to receive a message before it times out. The default value is 300 seconds.
•
Leave Timeout — Indicates the amount of time the host waits, after requesting
to leave the IGMP group and not receiving a Join message from another station,
before timing out. If a Leave Timeout occurs, the switch notifies the Multicast
device to stop sending traffic The Leave Timeout value is either user-defined,
Immediate Leave
or an
Define the relevant fields.
contains the following fields:
value. The default timeout is 10 seconds.
10
254