Black & Decker MTHD5 Original Instructions Manual page 8

ENGLISH
Accessories
The performance of your tool depends on the accessory
used. BLACK+DECKER and Piranha accessories are
engineered to high quality standards and designed to
enhance the performance of your tool. By using these
accessories you will get the very best from your tool.
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the
tool, remove the battery from the tool. Unplug the charger
before cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any
u
dust from the interior.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com
8
(Original instructions)
Technical data
No-load speed
Min
Max. torque Nm
Chuck capacity mm
Max drilling capacity
Steel/wood/masonry
mm
Weight
kg
Level of sound pressure according to EN 62841:
Sound pressure (L ) 88 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 99 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Drilling into concrete (a ) 11.7 m/s
h,D
Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
MTHD5 - Impact Drill
Black & Decker declares that these products described
under "technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment
Regulations 2012, S.I. 2012/3032 (as amended).
MTHD5 MTHD5
(14.4 V) (H1) (MAX) (H1)
0-450/0-1450 0-480/0-1550
-1
26 26
10 10
10/25/10 10/25/10
1.4 1.4
2 2
, uncertainty (K) 1.5 m/s