Cisco Catalyst 2950 Software Manual page 90

Default Settings
Table 4-2 Default Settings and Where To Change Them (continued)
Feature
Domain name
Cisco Discovery Protocol
(CDP)
Address Resolution
Protocol (ARP)
CoS and WRR
System Time Management
Mac Address Notification
Static address assignment
Dynamic address
management
VLAN membership
VMPS Configuration
VTP Management
Catalyst 2950 Desktop Switch Software Configuration Guide
4-8
Default
Setting Concepts and CLI Procedures
None "Configuring the Domain Name and the DNS"
section on page
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
Enabled "Configuring CDP" section on page
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
Enabled "Managing the ARP Table" section on
page 6-14.
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
Disabled "CoS and WRR" section on page
None "Setting the System Date and Time" section
on page 6-11.
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
Disabled "MAC Address Notification" section on
page 6-17.
None "Adding and Removing Static Address
assigned Entries" section on page
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
Enabled "Managing the MAC Address Tables" section
on page 6-15.
Documentation set for Cisco IOS Release 12.1
on Cisco.com.
– "Assigning VLAN Port Membership Modes"
section on page
– "How the VMPS Works" section on
page 8-28.
VTP server "Configuring VTP" section on page
mode
6-5.
6-13.
13-8.
6-18.
8-4.
8-12.
Chapter 4 General Switch Administration
CMS Option
Administration > IP Addresses
Cluster > Hop Count
Administration > ARP
Device > QoS
Administration > System Time
–
Administration > MAC
Addresses
Administration > MAC
Addresses
VLAN > VLAN
VLAN > VMPS
VLAN > VLAN
78-11380-03