Device Popup Menus - Cisco Catalyst 2950 Software Manual

Chapter 2 Getting Started with CMS

Device Popup Menus

Specific devices in the Topology view display a specific popup menu:
•
•
•
•
•
•
The Device Manager option in these popup menus is available in read-only mode on Catalyst 2950
Note
switches running Cisco IOS Release 12.0(5)WC2 and later. It is also available on Catalyst 2950 switches
running Cisco IOS Release 12.1(6)EA2 and later. It is not available on the Catalyst 1900 and
Catalyst 2820 switches.
To display a device popup menu, click an icon, and right-click.
Table 2-15 Device Popup Menu of a Cluster Icon
Popup Menu Option Task
Expand cluster View a cluster-specific topology view.
Properties Display information about the device and port on either end of the link and the state of the link.
Table 2-16 Device Popup Menu of a Command-Switch Icon
Popup Menu Option Task
Collapse cluster View the neighborhood outside a specific cluster.
1
Host Name Change the host name of a switch.
Bandwidth Graphs Display graphs that plot the total bandwidth in use by the switch.
Properties Display information about the device and port on either end of the link and the state of the link.
1. Not available in read-only mode. For more information about the read-only and read-write access modes, see the
page 2-31.
78-11380-03
Cluster (Table 2-15)
Command switch (Table 2-16)
Member or standby command switch
Candidate switch with an IP address
Candidate switch without an IP address
Neighboring devices (Table
(Table 2-17)
(Table 2-18)
(Table 2-19)
2-20)
Catalyst 2950 Desktop Switch Software Configuration Guide
Menus and Toolbar
"Access Modes in CMS" section on
2-23