Cisco Catalyst 2950 Software Manual page 55

Chapter 2 Getting Started with CMS
Table 2-10 Menu Bar (continued)
Menu-Bar Options
Cluster
3
Cluster Manager
1 4
Create Cluster
1 5
Delete Cluster
1 5
Add to Cluster
1 5
Remove from Cluster
Standby Command Switches
2 5
Hop Count
Device
5
Device Manager
1
Host Name
2
STP
2
IGMP Snooping
2 6
ACL
1
(guide mode available )
1 6
Security Wizard
2
QoS
(guide mode available on some
1
options )
1
802.1X
1
AVVID Wizards
78-11380-03
Task
Launch a CMS session from the command switch.
Designate a command switch, and name a cluster.
Delete a cluster.
Add a candidate to a cluster.
Remove a member from the cluster.
2 5
Create a Hot Standby Router Protocol (HSRP) standby group to provide
command-switch redundancy.
Enter the number of hops away that a command switch looks for members and for
candidate switches.
Launch Device Manager for a specific switch.
Change the host name of a switch.
Display and configure STP parameters for a switch.
Enable and disable Internet Group Management Protocol (IGMP) snooping and IGMP
Immediate-Leave processing on the switch. Join or leave multicast groups, and configure
multicast routers.
Create and maintain access control lists (ACLs), and attach ACLs to specific ports.
Filter certain traffic, such as HTTP traffic, to certain users or devices.
Display submenu options to enable and disable quality of service (QoS) and to configure
or modify these parameters:
2 6
• Trust settings
2
• Queues
2 6
• Maps
2 6
• Classes (guide mode available
2 6
• Policies (guide mode available
Configure 802.1X authentication of devices as they are attached to LAN ports in a
point-to-point infrastructure.
1
Video Wizard —Optimize multiple video servers for transmitting video traffic.
•
Priority Data Wizard
•
1
)
1
)
1
—Provide a higher priority to specific applications.
Catalyst 2950 Desktop Switch Software Configuration Guide
Menus and Toolbar
6
6
2-17