Installing The Cisco Secure Router 520 Adsl-Over-Pots Router - Cisco 520 Hardware Installation Manual

Chapter 4 Router Installation
Connect the AC adapter to the router. See the
Step 5
To configure the router software by using the command-line interface (CLI) or to troubleshoot problems,
Step 6
connect a terminal or PC to the console port. See the
section on page
Step 7 (Optional) To use the console port as a backup link to the WAN port in case the ADSL service goes down,
connect an analog modem to the console port. See the
Console Port" section on page

Installing the Cisco Secure Router 520 ADSL-over-POTS Router

Figure 4-2
figure shows the front panel of the router.
Figure 4-2
1
3
OL-12892-01
4-14.
shows a typical installation for the Cisco Secure Router 520 ADSL-over-POTS router. The
Typical Installation of a Cisco Secure Router 520 ADSL-over-POTS Router
1
1X
2X
1X
2X
1
Ethernet connection to an external switch
ADSL-over-POTS connection
"Connecting the AC Adapter" section on page
"Connecting a Terminal or PC to the Console Port"
"Connecting an Asynchronous Modem to the
4-14.
2 3
2 Ethernet connection to a PC
4 Console port
Cisco Secure Router 520 Series Hardware Installation Guide
Typical Installation
4-12.
Cisco Secure Router 500 Series
4
4-3