Typical Installation - Cisco 520 Hardware Installation Manual

Router Installation
This chapter provides the procedures for cabling and installing a Cisco Secure Router 520 Series router.
The chapter contains the following sections:
•
•
•
•
•
•
•
•
•
•
•
Before you start the cabling procedure, do the following:
Note
•
•

Typical Installation

The following sections describe and depict a typical installation for each of the
Cisco Secure Router 520 Series routers:
•
•
•
OL-12892-01
Typical Installation, page 4-1
Connecting a Server, PC, or Workstation, page 4-6
Connecting an External Ethernet Switch (Optional), page 4-7
Connecting a Broadband Modem, page 4-8
Connecting an ADSL Line-ADSLoPOTS Port, page 4-9
Connecting an ADSL Line-ADSLoISDN Port, page 4-10
Connecting the AC Adapter, page 4-12
Connecting a Terminal or PC to the Console Port, page 4-14
Connecting an Asynchronous Modem to the Console Port, page 4-14
Verifying Router Operation, page 4-16
What to Do Next, page 4-16
Read the safety warnings and guidelines in the
page 2-1.
Mount the router as described in
Installing the Cisco Secure Router 520 Ethernet-to-Ethernet Router, page 4-2
Installing the Cisco Secure Router 520 ADSL-over-POTS Router, page 4-3
Installing the Cisco Secure Router 520 ADSL-over-ISDN Router, page 4-5
C H A P T E R
"Safety Warnings and Guidelines" section on
Chapter 3, "Router Mounting Procedures."
Cisco Secure Router 520 Series Hardware Installation Guide
4
4-1