Installation Guide
Step 3. Configuring WFM Administrator Access
To configure WFM administrator access:
1. From the WFM Administrator Password window
for the WFM administrator using one of the methods below.
■
■
NOTE: Store this password in a safe place. You will need it to log into
WFM as an administrator.
Figure 8.
2. Click Next. The Active Directory window appears.
3. Go to
36
If you are upgrading WFM, enter the password that you used the first time
you installed WFM in the Current Administrator Password field.
If you are installing WFM for the first time, enter a password in the New
Administrator Password and Confirm New Administrator Password fields.
WFM Administrator Password
"Step 4. Configuring Active Directory" on page
(Figure
8), enter the password
37.
October 2007