Table of Contents
Advertisement
Upgrading Software
Upgrading Software
This section describes how to use the Software Upgrade Utility to upgrade Cisco software installed on
Cisco devices.
Procedure
In the General Information section of the Upgrade Utility dialog box, enter the IP address of the device
Step 1
you want to upgrade.
Step 2
In the Login Information section, enter the administrator user name and password for the target device,
as configured in the device network configuration settings.
Step 3
(Optional) Modify the read and write community settings for the target device as follows:
(Optional) Select the components of the target device you want to upgrade as follows:
Step 4
Click Upgrade to upgrade all components of the Cisco device software (or only those components you
Step 5
manually selected via the Customize option).
The Cisco Software Upgrade Utility informs you whether or not the upgrade is successful.
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU12 and MCU24 Release 5.1
3-2
–
Click Customize SNMP Settings.
The Customize SNMP Settings dialog box displays.
Enter the required read community and write community values.
–
We recommend that you modify the default settings for security purposes.
Note
Click OK to return to the Upgrade Utility dialog box.
–
Click Customize.
–
The Customize dialog box appears.
Check the device components you want to upgrade in the Select the components you want to
–
upgrade list.
The components displayed vary according to the Cisco device upgraded.
Note
Click OK to return to the Upgrade Utility dialog box.
–
When the upgrade is complete, the Cisco device automatically resets itself and starts
Note
operation with the new software version.
Chapter 3
Using the Cisco Software Upgrade Utility
OL-11897-01
Advertisement
Table of Contents
