Table of Contents
Advertisement
Chapter 2
Setting Up Your Cisco Unified Videoconferencing 3515 MCU
Saving Network Configuration Settings
Modified network configuration settings are automatically saved when you exit the video processing
module Main menu.
Procedure
Step 1
Ensure you have completed your configuration.
Step 2
At the prompt, enter Q to exit the video processing module Main menu.
The video processing module Main menu closes and your machine will automatically reboot.
Managing and Monitoring the Cisco Unified
Videoconferencing 3515 MCU Unit
You can manage and monitor the Cisco Unified Videoconferencing 3515 MCU unit locally or from
remote connections. You can also upgrade Cisco Unified Videoconferencing 3515 MCU software.
SNMP Management
The Cisco Unified Videoconferencing 3515 MCU unit is equipped with an SNMP agent. You can access
the Cisco Unified Videoconferencing 3515 MCU unit using an SNMP management client.
Local Port Monitoring Connections
You should access the Cisco Unified Videoconferencing 3515 MCU unit using a local port connection
for preliminary configuration and monitoring.
Serial Port
The Cisco Unified Videoconferencing 3515 MCU unit includes a DB-9 serial port connector and an
RJ-45 serial port connector. The DB-9 serial port is used to access the boot sequence menu from a local
PC. Using a terminal emulation application running on the PC, you can assign an IP address and subnet
mask to the Cisco Unified Videoconferencing 3515 MCU unit.
The RJ-45 serial port is used to connect a PC terminal to the Cisco Unified
Videoconferencing 3515 MCU unit.
OL-11897-01
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3515 MCU12 and MCU24 Release 5.1
Managing and Monitoring the Cisco Unified Videoconferencing 3515 MCU Unit
2-13
Advertisement
Table of Contents
