Using Mute - Cisco Unified Wireless IP Phone 7925G Quick Reference

If you want to...
Remove a call from
hold on the current line
(using the Bluetooth
wireless headset)
Remove a call from
hold on a different line
Move a call on a shared
line to your wireless
phone or to your desk
phone
Tips
• Engaging the Hold feature typically generates music or a beeping tone.
• If you receive an alert for an incoming call and a reverting call at the same time, by default your
phone will shift the focus of the phone screen to display the incoming call. Your system
administrator can change this focus priority setting.
• If you use a shared line, Hold Reversion rings only on the phone that put the call on hold, not on
the other phones that share the line.
• The duration between Hold Reversion alerts is determined by your system administrator.

Using Mute

With Mute enabled, you can hear other parties on a call, but they cannot hear you. You can use Mute
with the phone or a headset.
If you want to...
Toggle Mute on
Toggle Mute off
40
Then...
See the instructions from your Bluetooth wireless headset documentation.
Note If there is an active call and a held call on the line, you can end the
active call or place it on hold when you resume the held call.
1. Press to change to another line.
2. Press Resume.
Note If a single call is holding on this line, the call automatically resumes. If
another call is holding, scroll to the appropriate call and press Resume.
1. From the phone with the active call on the shared line, press Hold.
2. From your other phone with the shared line, press Resume.
Then...
During a call, press
at the top of the phone screen.
Press . The
on left side of phone. The
icon disappears.
icon appears
OL-16132-01