Cisco Unified Wireless IP Phone 7925G Quick Reference page 46

If you want to...
Switch from a connected
call to answer a ringing call
(using the Bluetooth
wireless headset)
Answer using call waiting
Send call directly to your
voice messaging system
(using the handset)
Send call directly to your
voice messaging system
(using the Bluetooth
wireless headset)
Retrieve a parked call on
another phone
Use your phone to answer a
call ringing elsewhere
Answer a priority call using
the handset
Answer a priority call using
the Bluetooth wireless
headset
Automatically connect to an
incoming call after a ring or
two
38
Then...
See the instructions from your
Bluetooth wireless headset
documentation.
Press Answer.
Press iDivert.
Use the Call Reject feature on your
Bluetooth wireless headset (exact
feature name may vary). For more
information, see your Bluetooth
wireless headset documentation.
Note If iDivert is not configured for
your phone by the system
administrator, the phone ignores
the call reject request.
Use Call Park.
Use Call Pickup.
Disconnect the current call and press
Answer or .
Disconnects the current call and
answers a ringing call. For more
information, see your Bluetooth
wireless headset documentation.
Ask your system administrator to set
up the Auto Answer feature. After
ringing once or twice, the call
automatically connects to the handset
or headset without pressing
For more information, see...
Switching Between Multiple
Calls, page 41
Accessing Voice Messages,
page 87
Accessing Voice Messages,
page 87
Tracing Suspicious Calls,
page 62
Picking Up a Redirected Call
on Your Phone, page 54
Prioritizing Critical Calls,
page 62
Prioritizing Critical Calls,
page 62
Using AutoAnswer, page 69
.
OL-16132-01