Cisco Unified Wireless IP Phone 7925G Quick Reference page 55

If you want to...
Create a conference by joining
together existing calls that are
on a single line
Create a conference by joining
together existing calls that are
on multiple lines
See a list of conference
participants or remove
participants
Tips
• If you frequently join more than two parties into a single conference, you might find it useful to
first select the calls that you want to join, then press Options > Join to complete the action.
• When Join completes, caller ID changes to "Conference."
• You may be able to combine multiple conference calls by using the Join or DirTrfr softkeys. Check
with your system administrator to see if this feature is available to you.
Cisco Unified Wireless IP Phone 7925G for Cisco Unified Communications Manager 7.0
Then...
1. From an active call, press
you want to include in the conference, and choose Options >
Select.
The icon appears next to the selected call.
Note that the active call is automatically selected.
2. Repeat this step for each call that you want to add.
3. From a selected call, choose Options > Join.
1. From an active call, choose Options > Join.
2. Press and select the line for calls that you want to
include in the conference.
One of the following occurs:
The calls are joined.
–
You may be prompted to select the call(s) that you want to
–
join. Highlight the call(s) and choose Options > Select, then
Options > Join to complete the action.
Note If your phone does not support Join for calls on multiple lines,
transfer the calls to a single line before using Join.
Choose Options > ConfList. See
Participants, page 49.
Basic Call Handling
, highlight another a call that
Viewing or Removing Conference
47