Customizing The Phone Screen - Cisco Unified Wireless IP Phone 7925G Quick Reference

If you want to...
Adjust the phone volume
level
Adjust the headset volume
level
Select the devices that will
ring

Customizing the Phone Screen

You can customize the left softkey (when the phone is idle), your phone screen display brightness, and
the language on your phone screen.
If you want to...
Set up the left softkey to
open the Phone Book
Set up the left softkey to
access your messages
72
Then...
1. Choose
2. Select Handset.
3. Press to increase the volume or
4. Press Save to make the change or Cancel.
1. Choose
2. Select Headset.
3. Press to increase the volume or
4. Press Save to make the change or Cancel.
1. Choose
2. Select Ring Output.
3. Select one of the following:
• Headset
• Speaker (default setting)
• Headset and Speaker
The icon appears next to your selection.
4. Press Save to make the change or Cancel. Ring output applies only
to wired headsets, not Bluetooth headsets.
Then...
1. Choose
2. Press Change.
3. Select Phone Book.
4. Press Save. The left softkey will be displayed as "Ph Book" when
the phone is idle.
1. Choose
2. Press Change.
3. Select Message.
4. Press Save. The left softkey will be displayed as "Message" when
the phone is idle.
> Phone Settings > Sound Settings > Volumes.
to decrease the volume.
> Phone Settings > Sound Settings.
to decrease the volume.
> Phone Settings > Sound Settings.
> Phone Settings > Customize Home Page.
> Phone Settings > Customize Home Page.
OL-16132-01