EN60745: estimation of exposure in the actual conditions of Model DGA406 use (taking account of all parts of the operating Sound pressure level (L ) : 80 dB(A)
Work mode: surface grinding with anti vibration side grip Cordless grinder safety warnings Vibration emission (a ) : 6.0 m/s h, AG Uncertainty (K) : 1.5 m/s Safety Warnings Common for Grinding, Sanding, Work mode: disc sanding with normal side grip Wire Brushing, or Abrasive Cutting-Off Operations: Vibration emission (a ) : 2.5 m/s...
Page 8
Keep bystanders a safe distance away from Do not attach a saw chain woodcarving blade work area. Anyone entering the work area or toothed saw blade. Such blades create fre- must wear personal protective equipment. quent kickback and loss of control. Fragments of workpiece or of a broken accessory Safety Warnings Specific for Grinding and Abrasive may fly away and cause injury beyond immediate...
Page 9
Support panels or any oversized workpiece to 13. Check that the workpiece is properly minimize the risk of wheel pinching and kick- supported. back. Large workpieces tend to sag under their 14. Pay attention that the wheel continues to own weight. Supports must be placed under the rotate after the tool is switched off.
It will CAUTION: Always install the battery cartridge also void the Makita warranty for the Makita tool and fully until the red indicator cannot be seen. If not, charger. it may accidentally fall out of the tool, causing injury to you or someone around you.
Overdischarge protection NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly When the battery capacity is not enough, the tool stops from the actual capacity. automatically. In this case, remove the battery from the tool and charge the battery.
Page 12
For tool with locking screw type Accidental re-start preventive wheel guard function Mount the wheel guard with the protrusions on the Even if the battery cartridge is installed on the tool with the wheel guard band aligned with the notches on the bear- slide switch in the "I (ON)"...
Installing or removing flex wheel CAUTION: Never switch on the tool when it is in contact with the workpiece, it may cause an Optional accessory injury to operator. CAUTION: WARNING: Always wear safety goggles or a Always use supplied guard when face shield during operation.
► Fig.17: 1. Lock nut 2. Abrasive cut-off wheel / dia- Operation with wire wheel brush mond wheel 3. Inner flange 4. Wheel guard for abrasive cut-off wheel / diamond wheel Optional accessory As for the installation, follow the instructions for CAUTION: Check operation of wire wheel depressed center wheel.
The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. •...