Table of Contents
Advertisement
SK209GD
[Loopback switch system]
NOTE:
The height of the horizontal line beam can be easily adjusted by using the tripod
(optional accessory).
1
Fine-adjustment mechanism
It can be fine-adjusted from either side by turning the fine-adjustment knob.
NOTE: About the rubber foot caps
Use the rubber caps to prevent the floor from being scratched or when the floor is
slippery.
Rubber caps are supplied as standard. These can be removed before use on
uneven surfaces such as concrete floor.
Lower dot beam
1: Fine-adjustment knob
20 ENGLISH
Lower dot beam
Advertisement
Table of Contents
