Installing Or Removing Battery Cartridge - Makita SK312GD Instruction Manual

NOTE: Some items in the list may be included in the tool package as
standard accessories. They may differ from country to country.

Installing or removing battery cartridge

CAUTION
• Always be sure that the tool is switched off and the battery cartridge is
removed before adjusting or checking function on the tool.
• Always switch off the tool before installing or removing of the battery
cartridge.
• Hold the tool and the battery cartridge firmly when installing or removing
battery cartridge. Failure to hold the tool and the battery cartridge firmly
may cause them to slip off your hands and result in damage to the tool
and battery cartridge and a personal injury.
1
2
To remove the battery cartridge, slide it from the tool while sliding the button
on the front of the cartridge.
To install the battery cartridge, align the tongue on the battery cartridge with
the groove in the housing and slip it into place. Insert it all the way until it locks
in place with a little click. If you can see the red indicator on the upper side of
the button, it is not locked completely.
1
2
14 ENGLISH
1. Red-colored section
2. Button