Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita SK700D
Summary of Contents for Makita SK700D
- Page 1 Makita SK700D / SK700GD...
-
Page 2: Table Of Contents
Overview Technical data Instrument Set-up Operations How to use the adapters and wall mount Message Codes Accuracy Check Care Safety instructions Optional accessories Makita SK700D/SK700GD... -
Page 3: Overview
Overview Ov e r v i e w The Makita SK700D/SK700GD is a self-levelling There are 2 different types available: 1 ON/OFF, Line beam mode selection multifunctional laser. It combines the advantage of three 360° line lasers in one tool and a fine adjust- Makita SK700D (red laser) 2 Status LED... -
Page 4: Technical Data
Laser line width at 5 m (16.4 ft) distance < 2 mm (<0.08 in) Tripod thread 1/4’’ (+ 5/8’’ with adapter) Pulse power for receiver Yes, auto * depending on lighting conditions ** with Makita LDX1 laser receiver Makita SK700D/SK700GD... - Page 5 Procedure 01/2014, are shown in the table. Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. Makita SK700D/SK700GD...
-
Page 6: Instrument Set-Up
Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Makita SK700D/SK700GD... - Page 7 CAUTION ing and slip it into place. Insert it all the way until it We recommend the Makita LDX1 laser locks in place with a little click. If you can see the Always switch off the tool before installing or receiver.
- Page 8 Instrument Set-up Makita CXT batteries Depending on the conditions of use and the ambient temperature, the indication may dif- fer slightly from the actual capacity. Indicating the remaining battery capacity Only for battery cartridges with the indicator Press the check button (2) on the battery cartridge to indicate the remaining battery capacity.
-
Page 9: Operations
30 min operation press and hold the ON button at start for 5 sec. The status LED blinks 3 times in green colour. To deactivate it again repeat the described steps until the status LED blinks 3 times in red colour. Makita SK700D/SK700GD... - Page 10 Horizontal mode Vertical side mode Vertical front mode Check if self-levelling is required and cor- * In very hot environments it can be that maximum respondingly activated. (See Levelling lock two lines work simultaneously (see Message for details) Codes). Makita SK700D/SK700GD...
- Page 11 5 sec and wait until the status LED blinks 3 times in red colour. 1x: smaller line width 2x: smallest line width 3x: standard line width 2 sec = save actual line beam mode and bright- ness 5 sec = reset to factory settings Makita SK700D/SK700GD...
-
Page 12: How To Use The Adapters And Wall Mount
Turn the instrument 360° to adjust the vertical line. adapter surely. Use the fine adjustment knob and turn the instru- ment around the vertical intersection / plumb point CAUTION within ± 10°. Do not attach other than the following instruments to L-adapter, SK105D/SK105GD/SK106D/SK106GD/SK700D /SK700GD Makita SK700D/SK700GD... - Page 13 Alignment of horizontal laser lines Turn the adjustment knob of the wall mount to fine adjust the horizontal line to the desired reference level. CAUTION Make sure that it is fixed well by screw or magnet to prevent it from falling down. Makita SK700D/SK700GD...
-
Page 14: Message Codes
Charge Li-Ion battery has low power blinks every 5 sec lights red Levelling lock is activated but instrument has Charge Li-Ion battery low power Levelling lock is activated for working without blinks every 5 sec blinks green self-levelling Makita SK700D/SK700GD... -
Page 15: Accuracy Check
|(A1 - A2) - (B1 - B2)| <=2 mm (B1). If the difference does not exceed 2 mm, then the instrument is within tolerance. Should your instrument be outside of the spe- cified tolerance, please contact a local dealer or an authorised Makita distributor. Makita SK700D/SK700GD... - Page 16 If the difference does not exceed 2 mm, then the instrument is within tolerance. Should your instrument be outside of the spe- cified tolerance, please contact a local dealer or an authorised Makita distributor. Makita SK700D/SK700GD...
- Page 17 B1, then the instrument is within tol- from point B1, then the instrument is within tol- erance. erance. Should your instrument be outside of the spe- cified tolerance, please contact a local dealer or an authorised Makita distributor. Makita SK700D/SK700GD...
- Page 18 Should your instrument be outside of the spe- Should your instrument be outside of the spe- cified tolerance, please contact a local dealer cified tolerance, please contact a local dealer or an authorised Makita distributor. or an authorised Makita distributor. Makita SK700D/SK700GD...
-
Page 19: Care
To clean the magnetic surface you could use compressed air or modelling clay. If the equipment get wet always dry it (max. 70°C/158°F) before repacking it into the case. Makita SK700D/SK700GD... -
Page 20: Safety Instructions
3. Always prevent access to the product by WARNING unauthorised personnel. Makita Line Laser and L-adapter / PRO L-adapter should not be used in the vicinity of pacemaker because of integrated magnets which can affect the function of the pacemaker. - Page 21 12. Use the batteries only with the products 5. Do not short the battery cartridge: water. If liquid contacts eyes, additionally specified by Makita. Installing the bat- (1) Do not touch the terminals with any seek medical help. Liquid ejected from teries to non-compliant products may res- conductive material.
- Page 22 It will turning the lock switch when transporting the hold waste. Care for the environment and take also void the Makita warranty for the Makita tool instrument (see Levelling lock). Please use the ori- them to the collection points provided in accord- and charger.
- Page 23 4. Consult the dealer or an experienced radi- o/TV technician for help This instrument complies with part 15 of the FCC rules. Operation is subjected to the following two conditions: 1. This instrument may not cause harmful interference, and Makita SK700D/SK700GD...
- Page 24 (e.g. binoculars, telescopes) can be hazardous. CAUTION Looking into the laser beam may be hazardous to the eyes. Wavelength SK700D red: 630 - 645 nm / SK700GD green: 510 - 530 nm Maximum radiant output power for classification <2 mW Pulse duration 30 - 70 µs...
-
Page 25: Optional Accessories
Op t i o n a l a c c e s s o r i e s CAUTION These accessories or attachments are recom- mended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to per- sons.