Makita SK312GD Instruction Manual page 12

Rechargeable green multi line laser
Hide thumbs Also See for SK312GD:
Table of Contents

Advertisement

9. Do not use a damaged battery.
10. The contained lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
For commercial transports e.g. by third parties, forwarding agents, special
requirement on packaging and labeling must be observed.
For preparation of the item being shipped, consulting an expert for hazardous
material is required.
Please also observe possibly more detailed national regulations.
Tape or mask off open contacts and pack up the battery in such a manner that it
cannot move around in the packaging.
11. Follow your local regulations relating to disposal of battery.
SAVE THESE INSTRUCTIONS.
CAUTION
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that have been altered,
may result in the battery bursting causing fires, personal injury and damage.
It will also void the Makita warranty for the Makita tool and charger.
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely discharged. Always stop tool
operation and charge the battery cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room temperature at 10 °C - 40 °C (50 °F -
104 °F). Let a hot battery cartridge cool down before charging it.
12 ENGLISH

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sk209gdSk209gdz0088381832540

Table of Contents