Using The Multi Line Laser; Installing The Multi Line Laser - Makita SK312GD Instruction Manual

Using the Multi Line Laser

1. Installing the Multi Line Laser

WARNING
1. Do not place the product or USB adapter at locations where there is the risk of
fall.
2. Before installing the battery on this product and placing on a floor or table, lower
the handle and check the product does not fall over.
Set this product on a level surface. Turn the adjustment
screw leg so that the bubble in the circular level comes to
the center of the red circle.
Circular level
When using the tripod, first set down the tripod. Then
mount the line laser on it. Extend or retract the legs of the
tripod so that the bubble in the level comes to the center of
the red circle.
17 ENGLISH