Table of Contents
Advertisement
Using the USB adapter (optional accessory)
1: DC jack cover
1.
Make sure that the product is turned OFF and remove the DC jack cover.
Then, connect the DC jack plug of the power supply cable to the DC jack.
2.
Connect the battery to the USB adapter.
3.
Turn the power switch on the USB adapter ON, then turn the power
switch on this product ON.
1
2
3
4
5
6
NOTICE
• The battery cannot be charged by the USB adapter.
• Before using the USB adapter, read its instruction manual.
1
* When using the USB adapter with a tripod (optional
accessory), install the hand strap (optional accessory) on
the USB adapter. With the tripod fixing screw firmly fixed
in place, hook the hand strap onto the fixing screw as
shown in the figure. If the fixing screw is loose, the USB
adapter might fall, and this might cause it to malfunction,
break the power supply cable or cause the USB terminals
or DC jack to malfunction.
1: Fixing screw
2: Hand strap
3: Tripod
4: Battery
5: USB adapter
6: Power supply cable
16 ENGLISH
1
1: DC jack
2: DC jack plug
2
Advertisement
Table of Contents
