Advertisement
Figure 8: RJ-45 connection diagram
2.
Enable the Hyper Terminal program. A terminal program is required to
make the software connection to the Managed Switch. Windows' Hyper
Terminal program is a good choice. Hyper Terminal can be accessed
from the Start menu. Click START, then Programs, Accessories and then
Hyper Terminal.
3.
The following screen will appear. Input a new connection name. You
should use something like the model name of your switch.
Figure 9: New Connection dialog window
4.
Change the Connect using drop-down menu to TCP/IP (Winsock) then input
Host address. The Managed Switches default IP address is 192.168.0.100 and
the default telnet port number is 23, then press the OK button.
P
N /
1
0
6
9
6
6
6
•
R
E
V
1
0 .
I •
S S
2
2
E F
B
1
0
firealarmresources.com
9
f o
1
3
Advertisement
