Advertisement
Figure 5: GE-DSH-73, GE-DSH-82 and the GE-DSH-82-PoE Login screen
Note: For security reasons, please change and memorize the new password after
this first setup. Passwords must be entered in lowercase letters in the console
interface.
Configure IP Address
The Managed Industrial Switch is shipped with default IP address as following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Managed
Industrial Switch, please use the procedures as follows:
Show the current IP address
1.
On the "Switch>" prompt, enter "enable" to enter Privileged EXEC mode.
2.
On the "Switch #" prompt, enter "show ip".
3.
The screen displays the current IP address, Subnet Mask and Gateway. As
show in Figure 6.
6 of 13
firealarmresources.com
P/N 1069666 • REV 1.0 • ISS 22FEB10
Advertisement
