Advertisement
Figure 1: Terminal block connectors
2.
Tighten the wire-clamp screws for preventing the wires from loosening.
Figure 2: Terminal block pinouts
Note:
The wire gauge for the terminal block should be in the range between 12 ~
24 AWG.
For the GE-DSH-82-PoE, A 48VDC, 3A power input is required for full PoE load on
the PoE. Please connect an external power source to the terminal block that can
supply steady power at 48VDC.
P/N 1069666 • REV 1.0 • ISS 22FEB10
1
2
3
Power 2
-
+
firealarmresources.com
4
5
6
Power 2
-
+
3 of 13
Advertisement
