Advertisement
Figure 6: IP information screen
Configure IP address
1.
On the "Switch# " prompt, type "configure" to enter the configuration mode.
2.
On the "Switch(config)# " prompt, enter the following command and press
<Enter>. As show in Figure 7.
Switch(config)# ip address 192.168.1.100 255.255.255.0 192.168.1.1
The previous command would apply the follow settings for the Managed
Industrial Switch.
•
IP: 192.168.1.100
•
Subnet Mask: 255.255.255.0
•
Gateway: 192.168.1.1
P/N 1069666 • REV 1.0 • ISS 22FEB10
firealarmresources.com
7 of 13
Advertisement
