Advertisement
and network cards. Actual performance will depend on a combination of these
components. Differences in performance can occur depending on the versions
and types of platforms, operating system and network cards used.
The minimum system requirements are:
•
Clients running Windows 98/ME, NT4.0, 2000/XP, Vista, MAC OS9 or later,
Linux, UNIX or other platform compatible with TCP/IP protocols.
•
Workstation installed with Ethernet NIC (Network interface Card)
•
Serial Port connection (Terminal)
•
Above PC with COM Port (DB-9)
•
Ethernet Port connection
•
Network cables - Use standard network (UTP) cables with RJ45
connectors.
•
Above PC installed with WEB Browser and JAVA runtime environment
Plug-in
Note:
We recommend using Windows XP or Windows 7 with Internet Explorer 6.0
or above for access to the switch management setup.
Wiring the Power Units
The 6-contact terminal block connector on the top panel of Managed Industrial
Switch is used for two DC redundant power inputs.
Note:
This product is intended to be supplied by a UL Listed Direct Plug-In Power
Unit marked "Class 2" or "LPS" and output rated 48 VDC, 380 mA minimum.
Please follow the steps below to insert the power wire.
1.
Insert the positive/negative DC power wires into the contacts 1 and 2 for
POWER 2, or 5 and 6 for POWER 1.
2 of 13
firealarmresources.com
P/N 1069666 • REV 1.0 • ISS 22FEB10
Advertisement
