Advertisement
Answering System Display Messages
The following messages show the status of the answering system or help you set up and use
the system.
0-59
CL (blinking)
- -
An (blinking)
F (blinking)
Six bars (blinking)
LA (Line Access)
Handset Sound Signals
Signal
A long warbling tone (with ringer on)
Three short beeps (several times)
Single beep every 7 seconds
Troubleshooting Guide
Caller ID Solutions
No Display
• The battery must be fully charged. Try replacing the battery.
• Make sure that the unit is connected to a non-switched electrical outlet. Disconnect the
unit from the wall and plug it in again.
• You must be subscribed to Caller ID service from your local telephone company in order
to receive Caller ID records.
Caller ID Error Message
• This message indicates either the presence of noise on the line, or that an invalid
message has been sent from the telephone company.
4
Indicates the total number of messages.
The voice time/day stamp needs to be set.
Answering system is turned off.
The system is answering a call.
Answering system memory is full.
The system is recording a memo or an announcement.
External line remote answering system.
Meaning
Signals an incoming call
Page signal
Low battery warning
Advertisement
