Advertisement
Leaving a Message/Memo
Use the memo feature to leave a message.
1. Press and hold the memo button.
. Begin speaking after you hear "RECORD MESSAGE" and start tone.
3. Release the memo button when you are finished recording the memo.
NOTE: Maximum recording time for memo is 3 minutes.
Screening Calls from the Base
1. When the answering system answers the call, listen while the caller leaves a message (to
determine who is calling).
. To speak to the caller, pick up the handset, and press the
The answering system automatically stops recording when you activate the handset or pick up
an extension phone.
TIP: Make sure the volume on the base is set loud enough to hear your
incoming calls.
Messages Playback
The message counter let you know when you have message(s) or new message(s). To play the
messages, press the
While a message is playing, you may do the following:
• Press the corresponding play/stop button to stop the message playback.
• Press and release the review button to restart the current message.
• Press and release the review button twice to go to the previous message.
• Press and release the skip button to go to the next message.
• Press the delete button to erase the current message.
Memory Full
When the answering system memory is full, the system answers after 10 rings. You should
erase some messages so the answering system may record new messages.
36
play/stop
button.
talk or speaker
button.
Advertisement
