Advertisement
1. Press the flash/answerer button to access the answering system. CALL SCREENING shows
2
on the display.
3
. Listen as the caller leaves a message.
3. Press the
talk or speaker
4
button to stop screening the call.
Accessing the Answering System from Another Location
You can access your answering system from any touch-tone phone by entering your 3-digit
security code during the playing of outgoing announcement or after you hear the outgoing
announcement.
1. Dial the telephone number to which the answering system is connected.
. Enter the security code during the outgoing announcement or after you hear the tone.
NOTE: The default security code is 123
3. Follow the voice menu to use the answering system's remote functions.
The remote feature lets you perform the following functions:
To
Review message
Play back messages
Stop message playback
Erase message
Skip message
Turn off/on answerer
Review voice menu options
Memory Full
When answering system memory is full, the system answers after 10 rings, beeps and waits for
you to enter the 3-digit security code. If you don't enter the security code within 8 seconds, the
phone hangs up.
You should erase some messages so the answering system can record new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access
the answering system, enter your 3-digit security code.
38
buttons to speak to the person or press the flash/answerer
Press this button
1
0 (during message playback)
3
4
7
Advertisement
