Advertisement
Inserting a Pause in the Dialing Sequence
Press the #PAUSE/RINGER button on the handset's touch-tone pad to insert a delay in dialing
sequence when a pause is needed to wait for a dial tone (for example, after you dial 9 for an
outside line, or to wait for a computer access tone.) Each pause counts as one digit in the
dialing sequence.
Edit Records
1. Make sure the phone is OFF (not in talk mode).
. Press the mem button to access the phone book sub-menu.
3. Use the vol/CID ( 6 or 5) button to scroll to EDIT RECORDS.
4. Press the menu ok/mute u button to confirm, display will show the records.
5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press mem
button to confirm, ENTER NAME shows on the display.
6. Repeat Steps 5 through 7 in "Add Records" section.
Delete Records
1. Make sure the phone is OFF (not in talk mode).
. Press the mem button to access the phone book sub-menu.
3. Use the vol/CID ( 6 or 5) button to scroll to DELETE RECORDS.
4. Press the menu ok/mute button to confirm, display will show the records.
5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to desired record, press the
del/intercom/conf button, DELETE? shows on the display.
6. Press the del/intercom/conf button again to confirm.
NOTE: If you don't want to change or delete a record, simply press the end
button, or wait for one minute to exit automatically.
Dialing a Number from Internal Memory
1. Make sure the phone is OFF (not in talk mode).
. Press the mem button to access the phone book sub-menu.
3. Use the vol/CID ( 6 or 5) button to scroll to VIEW RECORDS.
4. Press the menu ok/mute button to confirm
5. Use the vol/CID ( 6 or 5) button or key in alphabet to move to the desired number.
6. Press the talk or speaker buttons, the number dials automatically.
34
(of a Stored Number)
Advertisement
