Table of Contents
Advertisement
4.
Select Wireless.
5.
In the Region list, select your region. In some locations, you cannot change this setting.
6.
(Optional) Select the Enable Wireless Isolation checkbox.
When wireless isolation is enabled, computers and devices that join the network have
access to the Internet, but not to each other.
7.
To turn off the wireless radio, scroll down and clear the Enable Wireless Gateway Radio
check box.
If you clear this check box, you cannot use WiFi to connect to the modem router.
8.
To control the SSID broadcast, select or clear the Enable SSID Broadcast check box.
When this check box is selected, the modem router broadcasts its network name (SSID)
so that it displays when you scan for local WiFi networks on your computer or wireless
device.
9.
To change the network name (SSID), type a new name in the Name (SSID) field.
The name can be up to 32 characters long and it is case-sensitive. The default SSID is
randomly generated and is on the modem router's label. If you change the name, make
sure to write down the new name and keep it in a safe place.
10.
To change the wireless channel, select a number in the Channel list.
In some regions, not all channels are available. Do not change the channel unless you
experience interference (shown by lost connections or slow data transfers). If this
happens, experiment with different channels to see which is the best.
When you use multiple access points, it is better if adjacent access points use different
channels to reduce interference. The recommended channel spacing between adjacent
access points is four channels (for example, use Channels 1 and 5, or 6 and 10).
11.
To change the mode, select it from the Mode list.
N300 WiFi Cable Modem Router Model C3000
Specify Network Settings
55
Advertisement
Table of Contents
