NETGEAR C3700v2 Quick Start

Quick Start
N600 WiFi Cable Modem Router
Model C3700v2
Package Contents
modem router
Ethernet cable
Power adapter
1. Collect your cable Internet provider information.
Collect your cable account number, account phone number, and login
information (your email address or user name and password).
2. Turn off and disconnect existing modems
and routers.
If you are replacing a modem that is currently
connected in your home, unplug the modem
and plug the new modem router into the same
outlet.
3. Connect a coaxial cable.
Use a coaxial cable to connect the cable port
on the modem router to a cable wall outlet.
Make sure that the cable is tightly connected.
4. Connect the power adapter.
Connect the power adapter to modem router
and plug the power adapter into an electrical
outlet.
5. Wait for the Online LED to light solid green.
This process might take up to 10 minutes.
Note: When the Online LED lights, your modem router is not connected to the
Internet yet. You must activate your modem router with your Internet service
provider.
6. Connect your computer or mobile device to the modem router with
Ethernet or WiFi:
Ethernet. Use an Ethernet cable to connect a computer to the modem router.
WiFi. Use the WiFi network name (SSID) and password on the modem router
label to connect.
Modem router
Coaxial
cable
Computer
Ethernet cable
7. Log in to the modem router.
Launch a web browser and enter http://routerlogin.net or
http://192.168.0.1 in the address field of the web browser.
When prompted to log in, do the following:
Enter admin for the user name and password for the password.
Change the password.
Enter security questions and answers.
8. Activate your Internet service.
For information about how to activate your Internet service, see
Your Internet Service.
Power
adapter
Computer
Activate