N-Ann-Rly Annunciator Module - Honeywell Notifier NFW-100X Manual

Optional Module Installation
N-
ANN-RLY Annunciator Module

Specifications
• Operating Voltage: 24 VDC
• Max. Current:
 Alarm: 75 mA
 Standby: 15 mA
• Operating Temperature: 32°F to 120°F (0°C to 49°C)
• For indoor use in a dry location only

Mounting/Installation
The N-ANN-RLY relay module can be mounted inside the FACP main circuit board chassis or inside the ROME Series enclosure. Refer
to the N-ANN-RLY Installation Document #53318 for instructions on chassis mounting or to the ROME Series Installation Document
#53530 for mounting in the separate backbox.
using ANN-MBRLY mounting bracket
N-ANN-RLY on
ANN-MBRLY
mounting bracket
NFW-100X Manual — P/N LS10131-001NF-E:C 7/25/2018
FACP Chassis Installation
mounting holes
mounting hooks through
mounting slots
ROME Series Installation
mounting holes
mounting holes
Figure 2.28 N-ANN-RLY Mounting Options
FACP Backbox Installation
using ANN-MBRLY mounting bracket
grounding wire
mounting holes
ANN-MBRLY
mounting bracket
N-ANN-RLY
mounting holes
Installation
45