Table of Contents
Advertisement
Fig.14
► 1 . Locator 2. Socket bit
To remove the socket bit, pull the locator, and then pull
the socket bit. To install the socket bit, push it firmly into
the sleeve. Then install the locator by pushing it firmly
back.
Hook
1
2
3
Fig.15
► 1 . Groove 2. Hook 3. Screw
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool.
To install the hook, insert it into a groove in the tool
housing on either side and then secure it with a screw.
To remove, loosen the screw and then take it out.
OPERATION
Screwdriving operation
Fig.16
1
2
Fit the screw on the point of the bit and place the point
of the screw on the surface of the workpiece to be fas-
tened. Apply pressure to the tool and start it. Withdraw
the tool as soon as the clutch cuts in. Then release the
switch trigger.
CAUTION:
of the bit, be careful not to push in on the screw. If
the screw is pushed in, the clutch will engage and
the screw will rotate suddenly. This could damage a
workpiece or cause an injury.
CAUTION:
straight in the screw head, or the screw and/or bit
may be damaged.
MAINTENANCE
CAUTION:
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
1
cracks may result.
2
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
3
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Driver bits
•
Magnetic bit holder
•
Socket bits
•
Makita genuine battery and charger
•
Plastic carrying case
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
9 ENGLISH
When fitting the screw onto the point
Make sure that the bit is inserted
Always be sure that the tool is
These accessories or attachments
Advertisement
Table of Contents
