Table of Contents
Advertisement
The following settings are available:
•
None. Anyone can access your Wi-Fi network without a password and you are
responsible for charges incurred. NETGEAR recommends that you do not select this
option.
•
WPA2 Personal AES. Strong security that is supported by newer Wi-Fi devices
(default).
•
WPA/WPA2. Strong security that is supported by most Wi-Fi devices. Wi-Fi devices
that use either WPA or WPA2 can connect to the Jetpack.
5.
Click the Save button.
A confirmation page displays.
6.
Click the Save button.
Your settings are saved.
Note:
During this change, all Wi-Fi-connected devices are disconnected
from the Jetpack Wi-Fi network and must reconnect.
Configure the Wi-Fi Channel
The Wi-Fi channel is the active channel used by the Jetpack's Wi-Fi network. When many
Wi-Fi networks in the same location use the same channel, it can cause interference. By
default, the Jetpack selects the best available channel, but you can specify the Jetpack's
Wi-Fi channel if you want.
To configure the Wi-Fi channel:
1.
From the Jetpack Admin website home page, select Jetpack Settings > Wi-Fi.
2.
To select a different profile, click a Wi-Fi profile button and click the Save button to confirm.
Selecting a different Wi-Fi profile will disconnect all current Wi-Fi connections.
Verizon Jetpack® 4G LTE Mobile Hotspot - AC791L
Customize the Wi-Fi Settings
32
Advertisement
Table of Contents
