RIDGID RT1600M0 Owner's Manual page 31

ASSEMBLY
Positioning Detachable Blower
(Powerhead Assembly)
1. To Remove the Detachable Blower
from the Powerhead Assembly, press
down on the Detachable Blower Latch
under the Detachable Blower Handle
and lift the Blower off the Powerhead
Assembly of the Vac.
TO REMOVE: PRESS DOWN ON DETACHABLE
BLOWER LATCH & ROTATE DETACHABLE
BLOWER UP
SP7082 RT1600M0 Spanish English.indd 31
Detachable
Blower Handle
Detachable
Blower Latch
2. To Replace the Detachable Blower
onto the Powerhead Assembly, position
Detachable Blower above the indented
area of the Powerhead Assembly.
Rotate the Detachable Blower down
until the travel of the unit stops.
3. Lightly press down on the Detachable
Blower Handle until you hear the
"snap" of the Detachable Blower Latch
engaging the Detachable Blower.
The Detachable Blower is now latched
to the Powerhead Assembly.
TO REPLACE:
ROTATE
DETACHABLE
BLOWER DOWN
31
Detachable
Blower Handle
Detachable
Blower Latch
Detachable
Blower Handle
Detachable
Blower Latch
Powerhead
Assembly
1/15/19 4:26 PM