RIDGID RT1600M0 Owner's Manual page 30

ASSEMBLY
Inserting / Removing the
Professional Locking Hose
1. To Insert Hose: Locate the end of the
Professional Locking Hose and align it
with the Drum Inlet. Position the Hose
Release Button onto the Vac Inlet Ridges.
Push the Hose end straight into the Vac
Inlet until the Hose Release Button fully
engages the Inlet Ridges.
2. Optional: Place the Utility Nozzle on the
opposite end of the Professional Locking
Hose, securing the Accessory with the
Professional Locking Hose. The Vac is
ready for use.
Hose Release Button
Professional Locking Hose
PROFESSIONAL
LOCKING HOSE
LOCKING BUTTON
SP7082 RT1600M0 Spanish English.indd 30
INSERT
HOSE
Drum
Inlet
Ridges
A
PROFESSIONAL
LOCKING HOSE
RELEASE BUTTON
3. To Remove Hose: Rotate the end of
the Professional Locking Hose in either
direction to release the Hose Latch
from the Inlet Ridges (A). Press the
Hose Release Button and pull the Hose
end straight out of the Vac Inlet (B).
30
REMOVE
HOSE
Inlet
Ridges
Hose
Release
Button
A
A
B
1/15/19 4:26 PM