Using Your Baumatic Fridge Freezer; Before Switching On; During First Use - Baumatic BR190BL-W Instruction Manual

Using your Baumatic fridge freezer

Before switching on

o Make sure that it has been installed by a suitably qualified
person, as
installation instructions.
o After delivery, wait for eight hours before connecting the
appliance to your mains supply. This will allow any refrigerant
gasses that may have been disturbed during the transportation
process to settle.
o The outside of the appliance and the removable accessories
contained within it, should be cleaned with a solution of liquid
detergent and water.
o The interior of the appliance should be cleaned
with a solution of sodium bicarbonate dissolved in
lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning
process has been completed.
o There can be an odour when you first switch on the appliance. It
will lessen as the appliance starts to cool.

During first use

o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the fridge
freezer reaches a cool enough temperature.
o With dry hands, connect your appliance to your mains supply.
Set the digital thermostat to MAX for a 24 hour period, before
setting it to the normal setting of NOR.
o During this period of time, you should try not to open the door
frequently or place a large amount of food within the appliance.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance on the thermostat or
reconnecting it to your mains supply.
per the information contained in Baumatic's
11